Barrier Gate

Safety

Design

Cost

Features of Full Height Turnstile

  Barrier gate is durable, accurate, flexible and safe. It assembles with aluminum alloy octagonal boom with the Max. Length of 6m, with the open/close time from 1.2s, 3s, and 6 seconds.

  Designed with balance mechanism, which makes boom start slowly, run quickly and stop slowly.

  Designed with low-speed aluminum-casing motor, integrated gearbox with low noise & quick heat-radiation.

  Intelligent over-heat protection system for driving mechanism, to control motor’s temperature and avoid damaging during frequent usage.

  Manual control in case of no power.

  Control Board in a Plastic box makes control board waterproof and dustproof.

  All part is made by mold make the barrier gate accurate and stable.

  Safety- Loop detector: after vehicle passed the barrier will automatically close once the loop input was triggered.

 

  Opening priority:

To protect the vehicle not to be hit by boom arm: While boom arm moving down a vehicle comes, if an open command is given by the push button or remoter transmitter, the arm will immediately stop closing, and start opening immediately.

  Manual control in case of no power:

Once power is off, just open the cabinet and manually control the barrier gate by a knob. Also barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlock manually.

  Anti-condensation in cold climate:

Antifreeze ensures the lubricant will not be frozen so that the boom barrier gate will keep working in frozen environment. No need to add more antifreeze within the lifetime of barrier.

  Overheat protection on motor:

Once the working temperature is more than 80 degree, the motor will stop working. However, before that the barrier will finish current. As long as the temperature return normal, the motor will recovery.

  Control Board in a Plastic box:

Putting then control board into a plastic box makes control board waterproof and dustproof, also protects operator.

Multiple Barrier Gate Models for Chosen

Model No DS706 DS712 DS801
Beam Aluminum alloy Aluminum alloy Aluminum alloy
Framework Material Cold-roll sheet, IP54 level Cold-roll sheet, IP54 level Cold-roll sheet, IP54 level
Dimension 340 * 230 * 970mm 340 * 280 * 1120mm 331 * 286 * 936mm
Net Weight 50kg 50kg 55kg / 65kg
Input Interface Photo cell, loop detector, parking system Photo cell, loop detector, parking system Photo cell, loop detector, parking system
Input 12V relay signal or Pulse Wide>100MS 12V relay signal or Pulse Wide>100MS 12V relay signal or Pulse Wide>100MS
Power Supply AC220V/110V, 50/60Hz AC220V/110V, 50/60Hz AC220V/110V, 50/60Hz
Motor Consumption 24V DC 24V DC 24V DC
Power Consumption 70W 70W 80W / 150W
Operation Temperature -40°C to 85°C -40°C to 85°C -40°C to 85°C

 

Operation Humidity ≥90% ≥90% ≥90%
MCBF 3 million time 3 million time 5 million time
Push Button Support Support Support
Remote Control Two button remote transmitter, Distance≤50m Two button remote transmitter, Distance≤50m Two button remote transmitter, Distance≤50m
Optional Accessories Loop detector; IR photo cell Loop detector; IR photo cell Loop detector; IR photo cell
Max Beam Length 6M 6M 6M
Beam Type Straight | Articulated 90 degree | Articulated 180 degree | Fence | Telescopic Straight | Articulated 90 degree | Articulated 180 degree | Fence | Telescopic Straight | Articulated 90 degree | Articulated 180 degree | Fence | Telescopic
Opening/Close Time 3S – 6S 3S – 6S 3S – 6S

 

Easy installing, NO need any professional electrician skills

Just fix the screws on the ground and connect to power supply