Optical Swing Turnstile

Safety

Design

Cost

Features of Full Height Turnstile

  Barrier gate is durable, accurate, flexible and safe. It assembles with aluminum alloy octagonal boom with the Max. Length of 6m, with the open/close time from 1.2s, 3s, and 6 seconds.

  Designed with balance mechanism, which makes boom start slowly, run quickly and stop slowly.

  Designed with low-speed aluminum-casing motor, integrated gearbox with low noise & quick heat-radiation.

  Intelligent over-heat protection system for driving mechanism, to control motor’s temperature and avoid damaging during frequent usage.

  Manual control in case of no power.

  Control Board in a Plastic box makes control board waterproof and dustproof.

  All part is made by mold make the barrier gate accurate and stable.

  Safety- Loop detector: after vehicle passed the barrier will automatically close once the loop input was triggered.

 

  Opening priority:

To protect the vehicle not to be hit by boom arm: While boom arm moving down a vehicle comes, if an open command is given by the push button or remoter transmitter, the arm will immediately stop closing, and start opening immediately.

  Manual control in case of no power:

Once power is off, just open the cabinet and manually control the barrier gate by a knob. Also barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlock manually.

  Anti-condensation in cold climate:

Antifreeze ensures the lubricant will not be frozen so that the boom barrier gate will keep working in frozen environment. No need to add more antifreeze within the lifetime of barrier.

  Overheat protection on motor:

Once the working temperature is more than 80 degree, the motor will stop working. However, before that the barrier will finish current. As long as the temperature return normal, the motor will recovery.

  Control Board in a Plastic box:

Putting then control board into a plastic box makes control board waterproof and dustproof, also protects operator.

Easy installing, NO need any professional electrician skills

Just fix the screws on the ground and connect to power supply

Model No DS210 DS212 DS202
Framework Material 304 Stainless Steel / Plexiglas 304 Stainless Steel / Full Plexiglas
High standard S/S surface treatment
304 Stainless Steel
Dimension 1400 * 180 * 990mm 1600 * 180 * 990mm 1200 * 280 * 990mm
Net Weight 50kg 70kg 60kg
Passage Width 550mm 550mm 550mm
Passing Direction Single / Bi-directional Single / Bi-directional Single / Bi-directional
Power Supply AC220V/110V, 50/60Hz AC220V/110V, 50/60Hz AC220V/110V, 50/60Hz
Operation Voltage 24V DC 24V DC 24V DC
Power Consumption 40W 40W 40W
Operation Temperature -15 °C – 60 °C -15 °C – 60 °C -15 °C – 60 °C

 

Operation Humidity 0 ~ 95% (No freeze) 0 ~ 95% (No freeze) 0 ~ 95% (No freeze)
Working Environment Indoor / Outdoor Indoor / Outdoor Indoor / Outdoor
Flow Rate 35-40 people per minute 35-40 people per minute 35-40 people per minute
LED Indicator Yes Yes Yes
Input Dry contact Dry contact Dry contact
Emergency Automatic arm drop when power off Automatic arm drop when power off Automatic arm drop when power off
Infrared Sensor 4 pairs(standard) 5 pairs(standard) 3 pairs(standard)
Communication RS485, TCP/IP (need access controller) RS485, TCP/IP (need access controller) RS485, TCP/IP (need access controller)